SDC 2.5 Connector System

The SDC 2.5 connector system with SKEDD plug-in technology is the latest innovation from Phoenix Contact. This product will set a standard for PCB connection technology as it assures direct contact between the connector and the PCB and eliminates the need for a plug-and-header combination.

These connectors combine three characteristics in one product:

• Direct plug-in technology to the PCB
• Wire connections with push-in spring termination
• Tool-free installation

The contact zone is made up of two flexible halves that bend easily, enabling the contacts to easily adjust to plated-through holes on a printed circuit board. Upon insertion, the contact has sufficient force to establish a gas-tight connection with no special requirements for the PCB.

No tools are needed to connect to the PCB. To ensure a stable mechanical connection to the board, the side of each connector has locking pins that expand with a simple push of the orange locking tabs.

Video: SDC 2.5 with SKEDD Technology

Features and Benefits

• Push-in spring connection saves time during wiring: no screws need to be tightened
• With a wire range of 24 AWG to 12 AWG, the connector can accommodate most popular wire sizes
• Direct plug-in onto the PCB eliminates the need for a plug-and-header combination
• Design is cost-effective since only one component is now necessary and the soldering process is eliminated
• PCB is not subjected to additional thermal load during soldering since this process for the connector is eliminated
• 5.0 mm centerline
• One to 16 positions
• 12 A rating at 300 V
• Space savings of up to 45 percent is achieved since the overall height of the SDC 2.5 is less than a plug-and-header combination
• Up to 25 mating and unmating cycles provide for easy replacement or retrofitting