Analog Devices' LTC2876/LTC2877 are exceptionally robust, tolerating ±60 V faults on the bus pins and protected to ±52 kV ESD.

The ±35 kV PROFIBUS RS-485 transceiver, from Analog Devices, has true fail-safe circuitry, 20 Mbps data rate, and thermal shutdown protection.

This article describes best practices for new designs of PROFIBUS DP nodes, and covers bus node isolation, PROFIBUS compliance, and bus signal polarity.

LTC2876 and LTC2877 are designed to be true PROFIBUS compatible transceivers, tested using PROFIBUS loads and defined per exact specifications from PROFIBUS IEC 61158-2.

HMS' family of network connectivity products for customers using ControlLogix® and CompactLogix® to communicate with Modbus, PROFIBUS, DF1, and serial devices.

Skyworks’ Si858x RS-485 transceivers are ideal for industrial applications that demand isolated interfaces with a fieldbus system like ProfiBus or ModBus.

TI's DAC874xH modem integrates several broadly used industrial protocols and offer a wide temperature range, low quiescent current, and small package sizes.

M8-kontaktdon och färdiga kablar från Same Sky är A-kodade för 1 Gbit Ethernet eller B-kodade för Profibus.

HMS Networks' high-performance gateways connect devices or networks to EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS, and PROFINET control systems.

Kontaktdonssystemet Brad M12 Power L-Code från Molex ger upp till fyra gånger högre effekt än vanliga M12-kontaktdon, vilket gör det perfekt för tillämpningar med hög effekt.

Molex's D-sub connectors allow field connections to PROFIBUS bulk cable, reducing installation, connection, and troubleshooting time with its unique design.

ADI's ADM3065/ADM3066 transceivers are half duplex with high speed bidirectional data communication up to 50 Mbps.

ADI's ADM3061 and ADM3062 half-duplex RS-485 transceivers feature a ¼ unit load input impedance, which allows up to 128 transceivers on a bus.

TI's ISO1176T isolated differential line transceivers have a broken ground loop that allows it to operate with a larger common-mode voltage range.

The KUNBUS GmbH was founded in 2008 with the aim of providing innovative and economical products to the steadily growing market of industrial networks.

Texas Instruments' AM3358™ Sitara MCUs contain three subsystems: an ARM Cortex-A8 based MPU, POWERVR SGX graphics accelerator subsystem, and PRU-ICSS.

Conec M12 connector series is for BUS systems such as Profibus DP and 100 MHz industrial Ethernet applications.