Adafruit is a fast growing global leader in educational electronics platforms, prototyping and development tools operating out of a manufacturing facility in the heart of NYC. It was founded by Limor "Ladyada" Fried in 2005 and specializes in the design and fabrication of original electronic learning platforms, which Limor personally selects, tests and approves before releasing. Adafruit is in the vanguard of Open Source Hardware, striving to educate makers of all ages in the field of electronics and programming.
Mini Pan-Tilt Kit - 1528-1106-ND
This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up and downwards around 150°. It also comes fully assembled with two Micro Servos (SG-90 or SG-92 type) included and a 38 mm x 36 mm space to mount a camera or sensor or whatever you like.
Starter Pack for Arduino (Includes Arduino Uno R3) - 1528-1073-ND
This bundle is designed to get you started quickly and easily on your path of learning electronics. Designed for everyone, even people with little or no electronics and programming experience. The starter pack has everything you need (except tools) for all lessons.
Adafruit ARDX - v1.3 Experimentation Kit for Arduino (Uno R3) - 1528-1077-ND
This kit includes all the pieces needed to complete 11 different circuits, along with a experimenter's guide booklet & breadboard layout sheets.
Budget Pack for Arduino (Arduino Uno R3) - Uno w/328 - 1528-1078-ND
An optimized collection of parts and pieces to experiment with an Arduino at home, school or work. Includes the Thru-hole (THM) type Arduino Uno R3. The new Uno is the latest version after the Duemilanove, with an improved USB interface chip.
Motor party add-on pack for Arduino - 1528-1121-ND
Make your own Arduino motor party with a motor shield and a fine assortment of motors!
Analog Devices has always been committed to education, as exemplified by its highly trained applications engineers, online EngineerZone community, and extensive portfolio of textbooks, circuit notes, and magazine articles.
Advanced Active Learning Module - ADALM2000-ND
The ADALM2000 (M2K) Active Learning Module is an affordable USB-powered software-defined instrument that takes the capabilities of the ADALM1000 (M1K) Active Learning Module to the next level. With 12-bit ADCs and DACs running at 100 MSPS, the M2K brings the power of high performance lab equipment to the palm of your hand, enabling electrical engineering students and hobbyists to explore signals and systems into the tens of MHz without the cost and bulk associated with traditional lab gear.
ADALM-PLUTO Active Learning Module - ADALM-PLUTO-ND
The easy to use ADALM-PLUTO active learning module (PlutoSDR) helps introduce electrical engineering students to the fundamentals of software-defined radio (SDR), radio frequency (RF), and wireless communications. Designed for students at all levels and from all backgrounds, the module can be used for both instructor-led and selfdirected learning to help students develop a foundation in real-world RF and communications that they can build on as they pursue science, technology, or engineering degrees.
Advanced Learning Module - ADALM1000-ND
The ADALM1000 Active Learning Module is an easy to use tool available from Analog Devices that can be used to introduce fundamentals of electrical engineering in a self or instructor led setting. Offering two analog channels, it allows users to source and measure waveforms in voltage or current, easily characterizing arbitrary systems in terms of voltage vs current, over time, and over frequency.
Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments.
Uno Rev3 Evaluation Board - 1050-1024-ND
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Board MCU MEGA2560 - 1050-1018-ND
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
ARM® Education aims to help those interested in technology for education to learn from the experiences of the past, by drawing on the available education research as a starting point for the future.
ARM® Online Courses
Online courses from ARM Education Media are developed to help professionals, hobbyists and practitioners learn about state-of-the-art technologies from the wide ARM ecosystem. Each online course contains 10-14 modules, and each module comprises lecture slides with notes, hands on lab videos and lab solutions. The courses provide an understanding of ARM architecture and the principles of software and hardware system design on Arm-based platforms, essential for today’s computer engineering workplace. More information can be found at Arm Education Media website.
The Education Kit contains a full set of teaching materials including power point slides, lab manuals with solutions to professors, quizzes with answers and more, which can be readily used in a typical 10-14 week course. The Education Kit is available free-of-charge to university faculty and educators worldwide to use in their courses. More information can be found at Arm University Program website.
ARM® University Lab-in-a-Box Kit
The ARM University Program has teamed up with Digi-Key to ship the complete ARM-mbed™ Lab-in-a-Box hardware kit centered around the STMicroelectronics NUCLEO-F401RE board. Academics who want to adopt the kit in their teaching can request a sample donation from the Arm University Program website. The whole hardware kit needed for this product can be purchased from Digi-Key.
ARM® University Embedded Systems Education Kit with NXP-Embedded Artists
The ARM University Program has teamed up with Digi-Key to ship the complete ARM Embedded Systems Education Kit. The kit comprises an ARM Cortex®-M4 processor-based LPC4088 QuickStart Board and LPC4088 Experiment Base Board from Embedded Artists and NXP.
ARM® University Internet of Things (IoT) Education Kit
This education kit is based on the Nordic NRF51-DK board, providing the students with the knowledge required to design IoT systems that connect embedded sensors to the internet using commodity smartphones via low power Bluetooth Low Energy.
ARM® Education Kits for SoC Design Courses
The ARM University Program Education Kits on SoC Design are self-contained packages that take you through a full ARM-based SoC design flow from specification to implementation and testing.
ARM® University Digital Signal Processing (DSP) Education Kit With Cypress FM4 Starter Kit
This education kit uses the ARM Cortex-M4 based Cypress FM4 microcontroller board. It provides students with the knowledge required to build high performance yet energy-efficient digital signal processing applications at a very affordable price.
Cypress delivers high-performance, mixed-signal, programmable solutions that provide customers with rapid time-to-market and exceptional system value. Cypress offerings include the PSoC® Programmable System-on-Chip™, USB controllers, general-purpose programmable clocks and memories.
FM4 Starter Kits - 1534-1084-ND
The Starter Kit provides a low-cost solution to quickly start development on an Arm® Cortex®-M4 microcontroller. The board features peripheral devices to demonstrate the features of the FM4 S6E2CCA microcontroller. It also has an Arduino-compatible interface to connect with shields, making application development options limitless. The FM4 S6E2CCA microcontroller comes pre-programmed with an interactive application to test all of the on-board features using a virtual communication port to send message prompts, input test parameters, and output test results.
PSoC® 4000 Pioneer Kit - CY8CKIT-040-ND
The kit is designed as an easy-to-use and inexpensive development kit, highlighting the unique flexibility of the PSoC 4000 architecture. Designed for flexibility, this kit offers footprint compatibility with several third-party Arduino™ shields. In addition, the board features an RGB LED, integrated USB programmer/debugger, a program/debug header, USB-UART/I²C bridges, a proximity header, and an Arduino-compatible CapSense® Trackpad shield. This kit supports either 5 V or 3.3 V as power supply voltages.
PSoC® 4 Development Board - CY8CKIT-042-ND
The PSoC 4 Pioneer Kit is an easy-to-use and inexpensive development platform enabling you to create unique designs with the flexibility of PSoC® 4. Featuring the PSoC 4200 device family, this kit gives you the power of an Arm Cortex-M0 combined with the fully customizable analog and digital fabric of the PSoC in the palm of your hands.
PSoC® 4 M-Series Pioneer - 428-3391-ND
PSoC 4200M device family is an expansion to the PSoC 4 device family that offers more flash, GPIOs, and programmable analog and digital blocks. PSoC 4200M device is a true programmable embedded system-on chip, integrating custom analog and digital peripheral functions, memory, and an Arm® Cortex®-M0 microcontroller on a single chip. The programmable analog and digital peripheral functions allow higher flexibility, in-field tuning of the design, and faster time-to-market.
The PSoC 4 M-Series Pioneer Kit offers footprint-compatibility with Arduino™ Shields, 6-pin Digilent® Pmod™ Peripheral Modules, and Raspberry Pi boards. This kit features two CapSense® Proximity headers, a CapSense Gesture Pad, an ambient light sensor, a 3-Axis accelerometer, a PWM temperature sensor, an RGB LED, a push button switch, an onboard programmer/debugger and USB-UART/I2C bridge functionality block (KitProg), and a Cypress F-RAM™. This kit supports operating voltages of 3.3 V or 5 V.
PSoC® 4 CY8CKIT-049 4xxx Prototyping Kits - 428-3344-ND
The prototyping kits support PC connectivity through the Cypress USB-Serial controller. The devices can be programmed using the USB-Serial controller and the Bootloader Software Host tool. The CY8CKIT-049 is designed to be programmed using the onboard device bootloader through the Cypress USB-Serial device. The CY8CKIT-049 Prototyping kits support both the Arm® 32-bit Cortex-M0™ CY8C41xx and CY8C42xx device families. The PSoC 4 devices are the most reconfigurable Arm based processor providing programmable analog and digital blocks with flexible routing and interconnects. The CY8CKIT-049 Prototyping kits are also CapSense enabled as both the CMOD and CTANK capacitors necessary for CapSense and CapSense Proximity designs are loaded by default.
PSoC® 5LP Prototyping Kit - 428-3390-ND
The CY8CKIT-059 PSoC® 5LP Prototyping Kit features the CY8C5888LTI-LP097 device from the PSoC 5LP family. PSoC 5LP is the industry’s most integrated programmable SoC, combining high precision and programmable analog and digital peripherals with an Arm® Cortex®-M3 CPU in a single chip. Process sensor signals with the 24-bit hardware DFB coprocessor, offload traditional CPU tasks to the CPLD-based Universal Digital Blocks and increase system performance with peripheral-to-peripheral DMA controller. Integrate high-precision custom 20-bit Analog Front Ends with the Programmable Analog Blocks including OpAmps, PGAs, filters, comparators, SAR and Delta-Sigma ADCs and the industry's best CapSense touch-sensing solution.
CY8CKIT-042-BLE Bluetooth® Low Energy Development Kit - 428-3349-ND
The CY8CKIT-042-BLE Bluetooth Low Energy (BLE) Pioneer Kit is intended for use as a development platform for hardware or software in a laboratory environment. The board is an open system design, which does not include a shielded enclosure. For this reason, the board may cause interference with other electrical or electronic devices in close proximity. In a domestic environment, this product may cause radio interference. In such cases, the user may be required to take adequate preventive measures. In addition, this board should not be used near any medical equipment or RF devices.
Digi International™ is your M2M solutions expert. Digi™ develops reliable products and technologies designed to connect and securely manage local or remote electronic devices over the network or via the Web. Digi™ offers a wide range of embedded and non-embedded products, professional services and the Device Cloud by Etherios, a secure, on-demand cloud computing platform for device management and application integration. Digi™ solutions are cost-effective, easy to use and operate at the highest levels of performance, flexibility and quality.
XBee® ZigBee Mesh Kits - 602-1826-ND
Digi’s XBee ZigBee Mesh Kit offers a great way to learn how to use XBee RF modules for device connectivity and ZigBee based mesh networking. Starting with simple examples, provided is a step-by-step guidance as you assemble the kit components to create reliable, low-power device communications and sensor networks.
Wireless Connectivity Kit with XBee® S2C 802.15.4 - 602-1902-ND
The XBee 802.15.4 Modules Included in the Kit XBee and XBee-PRO 802.15.4 modules are embedded solutions providing wireless connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.
XBee® SX RF Module Development Kit - 602-1886-ND
XBee SX 1-Watt 900MHz RF modules are the “muscle modules” of the XBee ecosystem, providing a combination of reliability and redundancy for OEMs building low power, mission-critical wireless devices. They utilize the DigiMesh® networking protocol, featuring redundant mesh network operation and support for low-power sleeping nodes.
Digilent Inc. is a leading electrical engineering products company serving students, universities, and OEM's worldwide with technology-based educational design tools. Since its founding in 2000, Digilent products can now be found in over 2000 universities in more than 70 countries throughout the world providing high-value, expert quality solutions for a variety of customer needs.
Analog Discovery 2 USB Oscilloscope, Logic Analyzer and Variable Power Supply - 1286-1117-ND
Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab.
ZYBO Zynq™-7000 Development Board - 1286-1044-ND
The ZYBO (Zynq Board) is a feature-rich, ready-to-use, entry-level embedded software and digital circuit development platform built around the smallest member of the Xilinx Zynq-7000 family, the Z-7010. The Z-7010 is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core Arm Cortex®-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
Nexys™4 DDR Artix-7 FPGA Board - 1286-1081-ND
The Nexys4-DDR is a drop-in replacement for cellular RAM-based Nexys boards. Featuring the same Artix-7™ field programmable gate array (FPGA) from Xilinx, the Nexys4-DDR is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C) and collection of USB, Ethernet, and other ports, the Nexys4-DDR can host designs ranging from introductory combinational circuits to powerful embedded processors.
PmodUSBUART: USB to UART Interface - 1286-1097-ND
The PmodUSBUART provides a USB to UART cross-conversion through the FTDI FT232RQ. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format.
A leading supplier of opto-electronics, Industrial Fiber Optics provides numerous educational kits and training modules offering a look into the fast-growing world of laser and fiber optic technology.
IF-E10 Experimenter’s Kit - FB104-ND
The IF-E10 kit from Industrial Fiberoptics provides an introduction to components, simple circuits, and to begin applying basic fiber optic technology. This kit contains the innovative IF-E91A infrared LED and IF-D92 phototransistor, both utilizing integrated connectors which connect to 1000 μm plastic fiber with no additional components needed.
IF-E22 Educational Kit - FB105-ND
Industrial Fiberoptics IF-E22 kit provides hands-on experience with constructing basic fiber optic receivers, transmitters and cable interfaces. The kit contains a parts list; complete assembly instructions; technical discussions about why everything here works as it does; and a glossary of terms used. Users will learn how and why light can be "captured" and transmitted by lengths of optical fiber. With this basic information, one can go on to more sophisticated discussions and demonstrations of fiber optics in action.
Simplex Designer’s Kit - FB115-ND
This fiber optic kit contains all the components needed to construct a 125 kilobit per second 10-meter data link. The distance between the transmitter and receiver can be increased by purchasing additional cable and adding it to the fiber in this kit, using the retention clips and splice.
POF Tool Kit - FB130-ND
This kit and enclosed instruction sheet contain all the information you need to complete the most common procedures required for plastic optical fibers, even if you are new to fiber optics and fiber termination procedures.
Lattice Semiconductor is the global leader in smart connectivity solutions, providing market leading intellectual property and low-power, small form-factor devices that enable more than 8,000 global customers to quickly deliver innovative and differentiated cost and power efficient products.
MachXO3L™ SMA/DSI Breakout Boards - 220-1935-ND
MachXO3L starter kit is a very basic breakout board to allow simple evaluation and development of XO3L device. It is significantly smaller size and lower cost than XO3L DSI (LCXO3L-DSI-EVN) or SMA (LCXO3L-SMA-EVN) breakout board while it offers basic functionalities, a good way to start the evaluation of XO3L. A SPI Flash is available in this starter kit board. External boot or dual-boot functional capabilities can be evaluated with this MachXO3L starter kit. XO3L DSI breakout board is recommended for MIPI DSI, CSI2 etc I/O evaluation and XO3L SMA breakout board is recommended for high-speed differential I/O evaluation.
iCEstick Evaluation Board - 220-2656-ND
The iCEstick Evaluation Kit is an easy to use, USB thumb drive form factor board that allows rapid prototyping for a very low cost. The iCEstick Evaluation board is supported by Lattice iCEcube2™ design software for HDL development, and by Lattice Diamond Programmer for SPI flash programming to support the iCE40-1K device.
Today’s culture demands designs that consumes less energy and generates less heat. Maxim Integrated is a market leader for power, interface, and digital products that addresses these demands. Maxim Integrated provides support with reference designs, tools, technical documents, packaging, and more.
MAXREFDES99 Evaluation Board - MAXREFDES99#-ND
The MAXREFDES99# is an Arduino® form-factor shield which drives a 16x16 LED array for signage applications. It features the MAX7219 LED Driver to simplify controlling multiple LEDs in matrix or numeric display form.
MAX32630 Evaluation Board - MAX32630FTHR#-ND
The MAX32630FTHR# evaluation board is a development platform designed to help engineers quickly implement battery-optimized solutions with the MAX32630IWG+, an Arm® Cortex®-M4F microcontroller. This board is based on the Adafruit feather series and includes a Bluetooth module, SD card connector, 6-axis accelerometer/gyro, RGB indicator, and pushbutton.
MAX32625MBED Evaluation Board - MAX32625MBED#-ND
The MAX32625MBED provides a convenient platform for evaluating the capabilities of the MAX32625 microcontroller. It includes a MAX32625 Arm® Cortex®-M4 microcontroller with FPU, prototyping area with adjacent access to precision analog front end (AFE) connections, I/O access through Arduino®-compatible connectors, USB interface, and other general-purpose I/O devices.
MAX31856EVSYS Evaluation Board - MAX31856EVSYS#-ND
The MAX31856 EV system is the hardware and software to easily evaluate the MAX31856 thermocouple-digital converter. The system includes the MAX31856PMB1 peripheral module with a Pmod compatible connector and USB2PMB1 adapter board.
MAX31875EVKIT Evaluation Board - MAX31875EVKIT#-ND
The MAX31875 evaluation kit demonstrates the MAX31875 ±2°C-accurate local temperature sensor with I2C/SMBus interface. The EV kit includes a graphical user interface (GUI) that provides communication over I2C with an on-board master IC.
MikroE Thermo 6 Click Evaluation Board - 1471-1873-ND
Thermo 6 click is a precise and versatile ambient temperature measurement click board™, based on the Maxim Integrated MAX31875 temperature sensor.
Microchip Technology Inc. is a leading provider of microcontroller and analog semiconductors, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality.
Microchip Technology Academic Program
Microchip's Academic Program demonstrates on-going commitment to education by offering unique benefits and resources for educators, researchers and students worldwide. Microchip would like to partner with academia to increase the knowledge-base in embedded applications and promote that knowledge with future engineers and innovations.
XMEGA A1U Xplained Pro Evaluation Kit - ATXMEGAA1U-XPRO-ND
The XMEGA A1U Xplained Pro evaluation kit is ideal for evaluation and prototyping with the ATxmega128A1U microcontroller. Extension boards to the XMEGA A1U Xplained Pro can be purchased individually. The ATXMEGAA1U-XPRO evaluation kit does not include extension boards.
ATSAMD21J18A Evaluation Kit - ATSAMD21-XPRO-ND
The SAM D21 Xplained Pro evaluation kit is a hardware platform to evaluate the ATSAMD21J18A microcontroller. Supported by the Atmel Studio integrated development platform, the kit provides easy access to the features of the ATSAMD21J18A and explains how to integrate the device in a custom design. The Xplained Pro MCU series evaluation kits include an on-board Embedded Debugger, and no external tools are necessary to program or debug the ATSAMD21J18A. The Xplained Pro extension kits offer additional peripherals to extend the features of the board and ease the development of custom designs.
SAM R21 Xplained Pro Evaluation Kit - ATSAMR21-XPRO-ND
The SAM R21 Xplained Pro evaluation kit is a hardware platform to evaluate the ATSAMR21G18A microcontroller. Supported by the Atmel Studio integrated development platform, the kit provides easy access to the features of the ATSAMR21G18A and explains how to integrate the device in a custom design. The Xplained Pro MCU series evaluation kits include an on-board Embedded Debugger, and no external tools are necessary to program or debug the ATSAMR21G18A. The Xplained Pro extension kits offer additional peripherals to extend the features of the board and ease the development of custom designs.
MikroElektronika's weather station educational kit is a development kit that features MikroElektronika’s Fusion for Arm® V8 platform and a wide array of click boards for fast, effective project development. This kit gives university electronics engineering students the opportunity to create a real-world project that is both interesting and useful. The board features the first-ever debugger with Wi-Fi connectivity, allowing students to work together collaboratively and remotely access their designs.
Weather Station Educational Kit - 1471-2267-KIT-ND
The MIKROE-3512 Fusion for Armv8 is designed for rapid development of embedded applications. It offers broad set of standards as well as several unique features in the world of embedded electronics: programming and debugging over Wi-Fi network, support for many different Arm Cortex®-M based microcontrollers regardless of their pin number, and more.
MIKROE-3512 Fusion for Arm® Development Board - 1471-2191-ND
The MIKROE-3512 Fusion for Armv8 is designed for rapid development of embedded applications. It offers broad set of standards as well as several unique features in the world of embedded electronics: programming and debugging over Wi-Fi network, support for many different Arm Cortex®-M based microcontrollers regardless of their pin number, and more.
Flip and Click Boards
Flip and Click is Arduino's close cousin. This board shares a lot of Arduino's DNA, but flips to the other side with four mikroBUS™ sockets for connecting click boards™. Separate communication lines allow for thousands of click board combinations with no need for unsightly stacking or wire jumping. Flip and Click is a perfect sidekick for your adventures in maker land.
mikroBUS™ Click Boards™
mikroBUS click boards are plug-in play solutions designed to revolutionize the way users add new functionality to development boards. The user can push a click board into the innovative new mikroBUS socket and use it with zero hardware configuration. Categories of MikroElektronika mikroBUS adapter click boards include wireless connectivity modules, wired communication modules, sensor modules, display modules, interface modules, and miscellaneous modules and accessories.
MultiTech makes it easy for schools and universities to learn and apply new connectivity technologies. The University IoT Program focuses on both Low-Power Wide-Area Networks (LPWAN) and our award winning cellular connectivity platforms. LPWAN is a wireless network designed for long range communications using low power consumption and a low bit rate to connect a wide variety of "things". LPWAN includes both licensed (LTE Cat M1 and NB-IoT) and unlicensed bandwidth technologies (LoRa® spread spectrum). MultiTech’s IoT University Program is uniquely positioned with the expertise and products in both technologies to meet the widest variety of requirements for connectivity in education.
For LoRaWAN® Products - 1471-2267-KIT-ND
MultiTech Conduit® IoT Starter Kit for LoRa® Technology. The Conduit® IoT Starter Kit for LoRa® Technology provides everything needed to create a LoRa proof of concept - quickly and simply - enabling you to bring LoRaWAN® communication solutions to market as fast as possible.
MultiTech xDot® Micro Developer Kit. USB Dongle Developer Kit (MTMDK Series). The xDot® Micro Developer Kit (MTMDK Series) is a USB dongle that allows a developer to plug in a xDot (MTXDOT Series) and start developing their application.
For Cellular Products - 1471-2267-KIT-ND
MultiTech Dragonfly™ Nano. Embedded Cellular Modem and System-on-Module (SoM) (MTQN Cat-M1 Series). The Dragonfly™ Nano (MTQN Series) embedded cellular modems and SoMs are the industry's smallest form factor, end device approved devices that support a complete IoT operating system. These fully certified and MNO approved, ready-to-integrate modules can be used as either a cellular modem or System on Module. It offers developers the functionality of a programmable computing platform with the convenience of an onboard cellular radio all in one very compact design that is optimized for lower power consumption.
SocketModem® and Dragonfly™ Developer Kit. Cellular Developer Board and Accessories (MTUDK2-ST-CELL). It allows you to plug in the communications device and use it for testing, programming and evaluation. The kit includes a development board and all the necessary accessories to get you up and running right out of the box.
NKK Switches (NKK) is a global manufacturer of innovative electromechanical switches and programmable displays, setting the standard for quality and reliability in human-machine interface solutions. NKK provides full-service engineering support to include electronic system design, programming and value-added services by combining over 65 years of expertise and a true commitment to our partners’ success.
NKK offers HMI devices in a variety of actuator types including toggle, rocker, pushbutton, slide, rotary and keylock switches to illuminated, process-sealed, miniature, surface-mount, touch screen and programmable switch devices.
By combining the functionality of an electromechanical pushbutton or rocker switch with a graphic programmable OLED or LCD display, the SmartDisplay is a space-saving, dynamic, multi-function device. A wide array of SmartDisplay products are available from full-screen OLED to compact LCD.
IS-ENG-KIT Engineering Kits
NKK's engineering SmartDisplay™ line of development kits are comprised of ten (10) kits. Each kit is composed of various SmartDisplay product combinations with controls for up to two SmartDisplays or one OLED rocker. Flash memory is provided to store data, and schematics and firmware are included for firmware customization. The kits enable design flexibility and promote the functionality of how the SmartDisplay products can be utilized together.
NXP provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security, and Digital Processing expertise. These innovations are used in a wide range of automotive, identification, wireless infrastructure, lighting, industrial, mobile, consumer, and computing applications.
Freedom Development Platform
The NXP Freedom development platform is a small, low-power, cost-effective evaluation and development system perfect for quick application prototyping and demonstration of Kinetis MCU families. The platform offers an easy-to-use mass-storage device mode flash programmer, a virtual serial port and classic programming and run-control capabilities.
LPC1768 Arm Cortex®-M3 Evaluation Board OM11043 - 568-4916-ND
The OM11043 mbed NXP LPC1768 board allows for the creation of prototypes without having to work with low-level microcontroller details.
LPC1549 Evaluation Board OM13056 - 568-11353-ND
The LPC1549 LPCXpresso™ board with NXP's LPC1549 Cortex®-M3 microcontroller is designed to make it as easy as possible to get started with your project. LPCXpresso™ is a development platform available from NXP supporting NXP's Arm-based microcontrollers. The platform is comprised of a simplified Eclipse-based IDE and low-cost target boards which include an attached JTAG debugger. LPCXpresso™ is an end-to-end solution enabling embedded engineers to develop their applications from initial evaluation to final production.
Parallax, Inc. manufactures microcontrollers and microcontroller development tools. LCDs, AppKits and other related products are also available. Parallax, Inc. produces BASIC Stamp® single-board computers as well as development tools for PIC12/16Cxx® microcontrollers. Learn more about the innovative microcontroller solutions from Parallax in the kits below.
BOE-BOT USB Development Kit - 28832-ND
The Board Of Education USB (BOE-USB) is a complete, low-cost development platform designed for those interested in learning and using Parallax's 24-pin BASIC Stamp or Javelin Stamp modules. Its compact size, convenient features, and low price make it an ideal tool for the student and educator.
BASIC Stamp Development Platform - 28152-ND
A complete, low-cost development platform designed for those interested in learning and using Parallax’s 24-pin BASIC Stamp or Javelin Stamp modules. Its compact size, convenient features, and low price make it an ideal tool for the student and educator.
Propeller DIP Plus Kit - 130-32305-ND
The Propeller chip is designed to provide high-speed processing for embedded systems while maintaining low current consumption and a small physical footprint. The Propeller provides flexibility and power through its eight processors that can perform simultaneous independent or cooperative tasks, all while maintaining a relatively simple architecture. This kit implements the Propeller chip into a ready-to-use solution.
SparkFun supplies the bits and pieces to make your electronics projects possible. Whether it's a robot that can cook your breakfast or a GPS cat tracking device, SparkFun products and resources are designed to make the world of electronics more accessible.
SparkFun views electronics as more than just a fun hobby or a career path, but as a creative medium for changing the face of education. SparkFun believes that by empowering students with the tools and knowledge they need not only to explore the world of electronics, but to take ownership over their own educational goals, together we can build a better future.
KIT-13205 Inventor's Kit for MicroView - 1568-1071-ND
The MicroView is an amazingly small, Arduino compatible, OLED display module. The SparkFun Inventor’s Kit for MicroView provides you with not only the MicroView module and its programmer but also everything you need to hook up and experiment with multiple electronic circuits! With the MicroView SIK, you will be able to complete 11 circuits that will teach you how to write code, read sensors, and drive motors, while still being able to display information on the MicroView’s built in OLED screen.
DEV-12651 Digital Sandbox Board - 1568-1074-ND
The Digital Sandbox (DS) is a learning platform that engages both the software and hardware worlds. It is powered by a microcontroller that can interact with real-world inputs like light or temperature sensors while simultaneously controlling LEDs, motors, and other outputs. The Digital Sandbox is equipped with everything, on board, you will need to complete 13 experiments, including controlling an LED, measuring how loud things are, detecting what the temperature is, and more.
KIT-13320 Inventor's Kit for Photon - 1568-1128-ND
The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFun Inventor’s Kit for Photon provides you not only with the Photon RedBoard but everything you need to hook up and experiment with multiple electronic circuits. With the Photon SIK you will be able to complete circuits that will teach you how to read sensors, drive motors, and more. The SparkFun Inventor’s Kit for Photon is the latest and greatest in Internet of Things kits. Whether you’re a software developer just getting in to hardware, an EE learning software, or somewhere in between, this kit will help you get your projects hooked up to the Internet in no time.
HackRF One - 1568-1245-ND
This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
Seeed is a hardware innovation platform for makers to grow inspirations into differentiating products. By working closely with technology providers of all scale, Seeed provides accessible technologies with quality, speed and supply chain knowledge.
Grove Starter Kit for mbed - 1597-1032-ND
Grove Starter Kit for mbed is designed for beginners to get started with mbed as soon as possible. It contains many plug-n-play Grove modules for you to start exploring the mbed world. One goal is to have fun and build confidence with hardware and software in the journey.
Grove Starter Kit for LaunchPad - 1597-1213-ND
Grove Starter Kit for LaunchPad is a co-branded quick starter kit for Texas Instruments LaunchPad Development Kits. This kit carries one Grove Base BoosterPack and 10 carefully selected Groves modules. It enables users of the Texas Instruments Launchpad to rapidly prototype and hack together fun microcontroller-based projects. Grove Base BoosterPack is an expansion module that can plug on to the various LaunchPad development kits that TI offers.
Grove Starter Kit for LinkIt ONE - 1597-1029-ND
Grove Starter Kit for LinkIt ONE is a theme package for IoT (Internet of Things). It is designed to help you get an idea of IoT city and turn it into reality as soon as possible. It includes many of the most popular plug-n-play Grove modules for IoT city projects. The modules range from Dust Sensor to UV Sensor, Temperature&Humidity Sensor, and Barometer Sensor etc., helping you maximize the advantages of LinkIt ONE.
GrovePi+ Starter Kit for Raspberry Pi (CE certified) - 1597-1273-ND
Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and running with the Raspberry Pi quickly. Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board, you’re ready to start hardware playing and prototyping with the powerful platform.
idekick Basic Kit for TI LaunchPad - 1597-1149-ND
Sidekick is a collection of popular components for DIY projects. It is easy to create custom breadboard circuits that can interface with a development kit. This is an excellent starter kit for new electronics engineers and makers.
STMicroelectronics is a world leader in providing the semiconductor solutions that make a positive contribution to people’s lives, today and into the future.
STMicroelectronics SensorTile Curriculum: Introduction to Embedded Systems
The SensorTile is a new Internet of Things (IoT) system provided by STMicroelectronics integrating state-of-the-art processor, wireless interfaces, and sensor systems. The SensorTile can form the foundation for wearable consumer devices, wearable medical devices, residential IoT systems and vehicle IoT systems.
SensorTile Development Kit - 497-16719-ND
STEVAL-STLKT01V1 is the development kit for the SensorTile board (STEVAL-STLCS01V1). This kit includes all that is needed to remotely sense and measure motion, environmental and acoustical parameters. It is designed to support the prototyping phases of new projects and to dramatically accelerate the startup stages.
Terasic's DE10-Standard development tools present a robust hardware design platform built around the Intel system-on-chip (SoC) FPGA, which combines the latest dual-core Cortex®-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance and low-power processor system. Altera’s SoC integrates an ARM®-based hard processor system (HPS) consisting of processor, peripherals, and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Standard development board includes hardware such as high-speed DDR3 memory, video and audio capabilities, Ethernet networking, and much more.
DE0-CV Development Kit - P0192-ND
A robust hardware design platform, the DEO-CV Development Kit uses the Altera Cyclone V FPGA device as the center control for its peripherals such as the on-board USB Blaster, video capabilities and much more. This platform, provides the power and the performance you need for high-volume applications, including prototyping bridging, motor control drives, capture cards and handheld devices at the lowest costs.
DE10-Standard Development Kit - P0493-ND
The DE10-Standard development kit presents a robust hardware design platform built around the Intel system-on-chip (SoC) FPGA, which combines the latest dual-core Cortex®-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility.
DE10-Nano Development Kit - P0496-ND
The DE10-Nano development kit, featuring an Intel® Cyclone® V SoC FPGA, is a robust hardware design platform for makers, educators, and IoT system developers. Intel SoC FPGAs combine the familiarity of an Arm® processor with the flexibility of programmable logic.
DE10-Lite Evaluation Board - P0466-ND
The DE10-Lite is a cost-effective Altera MAX 10-based FPGA board. The board utilizes the maximum capacity MAX 10 FPGA, which has around 50K logic elements (LEs) and on-die analog-to-digital converter (ADC).
DE1-SoC Development Kit - P0159-ND
Altera’s DE1-SoC integrates an ARM®-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE1-SoC development board includes hardware such as high-speed DDR3 memory, video and audio capabilities, Ethernet networking, and much more.
Texas Instruments, a global semiconductor company, designs and manufactures analog, digital signal processing (DSP) and DLP® chip technologies. TI’s vast semiconductor inventory includes National Semiconductor products.
SimpleLink™ Wi-Fi® CC3100 LaunchPad - 296-37771-ND
LAUNCHPAD DEV BOARD CC3200, The SimpleLink™ Wi-Fi® CC3200 LaunchPad™ development kit (with QFN-packaged device) is an evaluation development platform for the CC3200 wireless microcontroller (MCU), the industry’s first single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using FTDI and includes sensors for a full out-of-the-box experience. This board can be directly connected to a PC for use with development tools such as Code Composer Studio™ Cloud integrated development environment (IDE) and IAR Embedded Workbench.
PMLK Buck EVM Board Using TPS541 - 296-44446-ND
The Buck Experiments Board is one board as part of the Power Management Lab Kit (PMLK) Series. The Buck Experiments Board has two different sections using two different ICs: TPS54160 and LM3475. The box that is shipped will contain the Buck EVM Hardware along with a bound version of the Buck Experiments Book that steps individuals through several experiments to reinforce their understanding of power supply design. The PMLK is intended to educate users and developers on electronic theory and TI power supply design through experiments.
PMLK LDO EVM Board Using TPS7A49 - 296-44447-ND
The LDO Experiments Board is one board out of five as part of the Power Management Lab Kit (PMLK). The LDO Experiments Board has two different sections using two different ICs: TPS7A4901 and TPS7A8300. The box that is shipped will contain the LDO EVM Hardware along with a bound version of the LDO Experiments Book that steps individuals through several experiments to reinforce their understanding of power supply design. The PMLK is intended to educate users and developers on electronic theory and TI power supply design through experiments.
MSP432P401R LaunchPad™ Evaluation Kit - 296-39653-ND
The MSP-EXP432P401R LaunchPad™ is an easy-to-use evaluation module (EVM) for the MSP432P401R microcontroller. It contains everything needed to start developing on the MSP432 Low-Power plus Performance Arm® 32-bit Cortex®-M4F microcontroller (MCU), including on-board emulation for programming, debugging, and energy measurements. The MSP432P401R device supports low-power applications requiring increased CPU speed, memory, analog, and 32-bit performance. Rapid prototyping is simplified by access to the 40-pin headers and a wide variety of BoosterPack™ plug-in modules that enable technologies such as wireless connectivity, graphical displays, environmental sensing, and many more. Free software development tools are also available such as TI's Eclipse-based Code Composer Studio™ (CCS) IDE, IAR Embedded Workbench™ IDE, and Keil µVision IDE. Code Composer Studio™ (CCS) supports EnergyTrace™ technology when paired with the MSP432P401R LaunchPad.
Twin Industries is a leading manufacturer of hardware development tools and prototyping products. For over thirty years, our bus extender cards, surface mount adapter boards, and prototyping boards have helped complete the critical path between concept and market release. The educational and development kits below offer both an introduction to the newest technologies, along with speeding time to market for established engineers.
DIY Multi-mode Timer Kit - 438-1082-ND
New educational kit from Twin Industries features an integrated 7-mode timer for ease of implementation.
40-Second Message Recorder Kit - 438-1083-ND
40-Second message recording development kit from Twin provides high-quality, single-chip, nonvolatile record/playback for 40, 60, 75, 90 & 120 seconds. These CMOS devices include an on-chip oscillator, microphone preamplifier, automatic gain control, antialiasing filter, smoothing filter and speaker amplifier. In addition it is microprocessor compatible, allowing complex messaging and addressing to be achieved.
Rolling Code, 4-channel UHF Remote Control Kit - 438-1086-ND
Versatile, rolling code remote control provides latching and momentary operation on each channel and high resistance to code interception. A sensitive, prebuilt receiver provides long range and its ready-to-use combination of parts speeds time to market.
Logic Probe Kit - 438-1077-ND
An important piece of equipment for test and measurement of digital equipment, the logic probe kit can be used in fault finding and testing as well as to assist in design work and to find out how digital equipment works. Switching to either TTL or CMOS, the kit includes detection circuit for very fast pulses and gives visual (3 LEDs) and audio (piezo buzzer) response.
Combination Lock Kit - 438-1078-ND
A fully-functional introduction to basic combination locks, this kit from Twin offers a touch pad with 9 separate pads, a relay capable of switching 250 V, and lock reset upon incorrect button presses.
3 ½ Digital LED Panel Meter Kit - 438-1080-ND
Make this general design 3 1/2 digit LED panel meter into your own voltage or current meter, or customize it to measure input from a transducer. Includes a separate display PCB.
Temperature Meter Kit - 438-1076-ND
This Kit shows how much of electronics today can be contained in a single chip - the Intersil 7106. Commercial low cost digital volt meters are nothing more than this kit, some switches, and passive components and a nice plastic case.
Building its reputation on very high reliability products and superior service, a 35-year history of consistency has earned VersaLogic the reputation of being the industry's most trusted embedded computer company. VersaLogic delivers state-of-the-art embedded computers, coupled with expert technical support, for critical markets such as the medical and defense industries.
EPH-V6/Display Converter and Accessories - 1241-1303-ND
The VL-EPH-V6 module provides a rugged converter from standard mini-DisplayPort video output to LVDS (Low Voltage Differential Signaling) display panel output. It allows system designers the ability to utilize their existing LVDS video panels with the latest embedded computer video output (mini-DisplayPort). As with all VersaLogic products, the VL-EPH-V6 is designed to support OEM applications where high reliability and long-term availability are required. From application design-in support, to the 5+ year production life guarantee, and a full 5-year warranty, the VL-EPH-V6 provides reliable video conversion for demanding applications.
Vishay Intertechnology, Inc. is one of the world's largest manufacturers of discrete semiconductors (diodes, MOSFETs, and infrared optoelectronics) and passive electronic components (resistors, inductors, and capacitors). These components are used in virtually all types of electronic devices and equipment, in the industrial, power supplies, automotive, computing, consumer, telecommunications, military, aerospace, and medical markets. Vishay's product innovations, successful acquisition strategy, and "one-stop shop" service have made it a global industry leader. Vishay is proud to be a major partner with Digi-Key Electronics. Shown below are some of the latest examples of the Vishay product line available through Digi-Key.
37-Pin DSUB Cable for the Power Electronics Lab - 541-2642-ND
Vishay Dale's 75771 cable connects the inverter board to the dSPACE CLP1104's interface board. It is responsible for the control signals required for controlling the two inverters on the inverter board to conduct several experiments in the Power Electronics Lab, based on the approach in the textbook Power Electronics: Converters, Applications and Design, written by Ned Mohan, Tore M. Undeland, and William P. Robbins; and the Electric Drives Lab based on the approach in the textbook Electric Machines and Drives: A First Course by Ned Mohan.
8-Pin Encoder Cable for the Power Electronics Lab - 541-2643-ND
Vishay Dale's 87784 cable connects the encoder output from Motorsolver's 10-pole BLDC machines to the dSPACE CLP1104's interface board to conduct experiments in the Power Electronics Lab, based on the approach in the textbook Power Electronics: Converters, Applications and Design, written by Ned Mohan, Tore M. Undeland, and William P. Robbins; and the Electric Drives Lab, based on the approach in the textbook Electric Machines and Drives: A First Course by Ned Mohan.
Power-Pole FPGA Controller Assembly for the Power Electronics Lab - 541-2644-ND
The FPGA-based control PCA (printed circuit assembly) is a standalone controller for performing experiments in the Power Electronics Lab. The Controller is equipped with an analog/digital interface compatible to the Power-Pole PCA to facilitate various PWM control functions without requiring the use of an interfacing PC.
UDOO is a joint effort between SECO and AIDILAB to deliver a new and powerful tool to the DIY, IoT and Educational markets. UDOO integrates in the same PCB a single board computer based on a Freescale i.MX6 multicore Arm processor and an integrated Arduino Due interface board. All the Arduino Due shields are fully compatible with UDOO, and the Arduino IDE running on the i.MX6 can be used to create Arduino sketches and upload them directly on the Arduino part of UDOO.
NEO is an open hardware computer equipped with a Freescale™ i.MX 6SoloX applications processor for Android and Linux. The processor embeds an Arm® Cortex®-M4 microcontroller that makes the board compatible with the Arduino™ environment allowing high performance. Ideal as a central element of more comprehensive projects, it easily enables the creation of a multitude of IoT applications, making the UDOO NEO even more innovative and appealing.
BASIC SBC - 1485-1012-ND
Educational open-source Arduino Uno compatible SBC, Freescale i.MX6 SoloX - 512 MB RAM - Gbit Eth
EXTENDED SBC - 1485-1013-ND
Educational open-source Arduino Uno compatible SBC, Freescale i.MX 6SoloX - 1 GB RAM - WiFi+BTLE - Sensors package
FULL SBC - 1485-1014-ND
Educational open-source Arduino Uno compatible SBC, Freescale i.MX 6SoloX - 1 GB RAM - WiFi+BTLE - Gbit Eth - Sensors package